Browse Free With Mtn Music Plus

Browse Free With Mtn Music Plus

Browse Free With Mtn Music Plus

Browse Free With Mtn Music Plus

Music plus data is one of the best alternative to browse now. Today i have new super fast proxy server for MTN music plus for you.

Step 1.
With these settings, you can repeat the subscription as many times as you can but remember to opt out first when the me finishes before subscribing again. Make sure you have zero naira.

Step 2.
Subscribe and activate the MTN Music Plus Bundle by text: MUSIC to 5900 then wait for the reply or after some seconds check your musicplus mb balance with *559*2#.

If step 2 not working try this

(Now you can renew your MTN music+ megabytes and keep flexing with your free browsing. New Method to Renew Your MTN Music+ Free 150MB Before the expired date or before you finish the initial 150MB given to you,
1. Instead of Cancel7D – Text Music to 5900
2. Then wait for the reply and send D again to5900.
3. Check your balance with *556*2#, 150MB should smile to you then.That is new way for you to renewing the 150MB over and over. Enjoy it while it!)

Step 3.
Click here to download and install the latest Psiphon Handler 100

Step 4.
Open the installed Psiphon app and configrure the handler as follows:
– Proxy Type: Real Host
Under X-Online-Host,
– Proxy Server: 41.220.75.51:49998
Just leave the others

Tap on Save to close the Handler Settings. Then a pop up will appear and you have to choose “Tunnel whole device”

You will be taken to the main screen where you will go to the “Options” menu and select a region.

1. Select “Best Performance” in the ‘region select’.
2. Go down and locate “More options” under the “handler” button.
3. Under the “Proxy Settings” Check the box beside “Connect through an HTTP” then select “Use the following settings”
– Host Address: 10.199.212.2
– Port: 8080

For PC users open your Pc simple server and configure it as shown below

LHOST = ‘127.0.0.1’
IMETHOD = 0
ISPLIT = 0
RHTTP = 0
TIMEOUT = 60
PHOST = ‘10.199.212.2’
RQUERY = ”
RPATH = 0
PTYPE = 0
KEEP = ”
BQUERY = ”
MQUERY = ”
RHTTPS = 1
PPORT = 8080
LPORT = 8080
VALHDR0 = ‘41.220.75.51:49998’
VALHDR1 = ”
VALHDR2 = ”
VALHDR3 = ”
IQUERY = ‘41.220.75.51:49998’
ADMODE = 0
CQUERY = ”
CUSHDR2 = ”
CUSHDR3 = ”
CUSHDR0 = ‘Host’
CUSHDR1 = ”
ILINE = 0
FQUERY = ”
SBUFF = 1024
RPORT = 0